Inlet Nipple Filter

Porous metal filters for regulator CGA-320 inlet nipples.

Porous metal filters for regulator CGA-320 inlet nipples. The filters are manufactured out of a sintered bronze (nickel plated). Great for protecting your regulator and filtering any debris that may come from CO2 tank. Highly recommended when using metal CO2 tanks.

Customers who bought this item also bought

1/4" x 1/8"MPT Brass Reducing Hex Nipple

This part goes between the regulator and the solenoid. The 1/4 side is threaded into the regulator's 1/4 npt and the 1/8 side goes into the solenoid manifold.

CGA-320 Nut & 2.5" Nipple

CGA-320 Nut and 2.5 inch Nipple for CO2 Regulator. Includes nylon washer. This part attaches to the regulators inlet and used to convert non-co2 regulator to co2 service.

10-32 Ports Check Valve

10-32 Ports Industrial Grade Brass Check Valve. The best and most reliable aquarium check valve to prevent water from back flowing into your co2 equipment. Can be used inline by screwing hose barbs(sold separately) on both ends. Very low 1/3 psi Cracking Pressure.