Sorry - this product is no longer available
CO2 Regulator Post Body Kit #2
A compact CO2 regulator post-body kit with quality US made industrial grade components. (NOTE: 12vdc power adapter sold separately. Kit will come disassembled.)
Best for CO2 regulators with outlet ports in the 7o'clock position. For regulators with outlet ports in the 9o'clock position, you would need to remove the low pressure gauge first for the solenoid to be screwed in.
Just a reminder to tighten the 10-32 fittings with care as you can easily strip the threads by over torquing them. After snugging finger tight, 3/4 turn is usually enough as the o-rings would make the seal. It is also advised to use a thin coat of Loctite Blue to prevent loosening.
