CO2 Regulator Parts | CO2 For Planted Tanks And Home Brewing. DIYCO2REGULATOR

1/4" Tube x 1/8" Male NPT Nickel Plated Brass Push-to-Connect Connector - Right Angle Swivel

This part usually threads into the needle valve and accepts a 1/4 (outside diameter) tubing. Right angle. Swivels 360 Degrees.

$4.50

1/4" Tube x 10-32UNF Male - Nickel Plated Push-to-Connect Connector

This part usually threads into the output of the needle valve with 10-32UNF thread. Accepts a 1/4 (outside diameter) tubing.

$2.50

1/4" Tube x 10-32UNF Male - Nickel Plated Push-to-Connect Connector - Right Angle Swivel

This part usually threads into the output of the needle valve with 10-32UNF thread. Accepts a 1/4 (outside diameter) tubing. Right Angle. Swivels 360 Degrees.

$6.50

1/4" x 1/8"FPT Reducing Hex Nipple - Nickel Plated

1/4" Male NPT to 1/8 Female Reducing Nipple.

$4.99

1/4" x 1/8"MPT Brass Reducing Hex Nipple

This part goes between the regulator and the solenoid. The 1/4 side is threaded into the regulator's 1/4 npt and the 1/8 side goes into the solenoid manifold.

$2.50

1/4" x 1/8"MPT Brass Reducing Hex Nipple - Nickel Plated

This part goes between the regulator and the solenoid. The 1/4 side is threaded into the regulator's 1/4 NPT and the 1/8 side goes into the solenoid manifold.

$4.99